Marbach Die Supplies includes in its portfolio a very special hand tool for simple and fast insertion of waste nicks into cutting rules: the marbanick|2+. This is the follow-on development of the long-standing and time-proven marbanick and marbanick|2.
André Angermeir, General Sales Manager Marbach Die Supplies & Automation: "The marbanick was developed to quickly and easily make final adjustments to the waste nick directly at the die-cutting machine. This is sometimes required by on-site conditions. In order to drive in the nick cleanly, with the correct thickness and reproducibility, the marbanick, later the marbanick|2 have been available from Marbach for many years. The marbanick|2+ is the further development of the marbanick|2, and now makes the insertion of the nick even easier and more flexible.
Not only does the marbanick|2+ have 3 different raster levels that allow the metal carbide wedge to exert more defined force, the hand tool also comes with several wedges in different thicknesses – between 0.3 mm and 0.6 mm – and includes a quick-change system as well. Depending on the requirements and the material to be die-cut, up to 12 reproducible nick sizes can thus be created. And all this can be done quickly and easily with a one-hand operation.
Angermeir continues: "The motto of the marbanick|2+ is "Stronger. Faster. Further." Due to the different raster levels, the handheld device has more defined power. The plus in our marbanick|2+ stands for ongoing development: as the latest version which sets even deeper nicks with additional power proves. The one-handed handling makes it quick and easy to use, and the wedges can also be changed in just a few seconds. Already several hundreds of satisfied customers worldwide use the marbanick|2+ on a daily basis. That makes it one of our top sellers in the hand tool portfolio."
Machine blanking is becoming increasingly important because compared to the manual process, it increases productivity in the entire postpress post press area. We offer customized blanking tools to increase efficiency in packaging production. Depending on your specific requirements, we select the most suitable blanking tool.
We are not only a specialist in tools and services for packaging production, but also provide systems for the storage of cutting-die packages. One satisfied customer who has installed a Marbach storage system in their company is Weiss Packaging in Simmerath, Germany.
In the corrugated board sector, one of our latest technologies is the DZL|plateXL, a zone levelling solution for large format die-cutting machines. This ensures significantly reduced make-ready times.