Marbach has optimized its reverse cutting technology. With the new height-adjustable anvil, customers can now adjust anvil height of their cutting-die on their own, if necessary, and thereby save a significant amount of make-ready time.
Various food packaging has opening mechanisms. Reverse cutting technology is one possibility to provide paperboard or corrugated board packaging with a tear-off feature. Reverse cutting is the optimal solution wherever attractive appearance, complete dust resistance and opening features – that can be opened and sealed easily – are crucial.
Marketing manager Tina Dost: “When using the reverse cutting technology, highest precision is vital for optimal function. Because in reverse cutting the board is scribed on both sides – from the inside and outside of the package. This task becomes more difficult the thinner the paperboard is. With our new, height-adjustable anvil our customers can now save make-ready time and achieve more consistent results.”
This new Marbach technology uses an aluminum block that is milled to shape. Its exact height depends on the thickness of the die-cut material. This aluminum block is not inserted into a laser cut contour in its complete height – as in conventional solutions – but in a height minus the die-board thickness and screwed onto the cutting-die from above. Foils are positioned underneath the anvil. The anvil can be adjusted in its height very quickly and easily through the removal or addition of these foils. Tina Dost: “In this way our customers can set-up their tool in the die-cutting machine much more quickly and precisely than with the conventional reverse cutting technology.”
Marbach offers this new reverse cutting option on the market with immediate effect.
Marbach supplies not only cutting-dies, but also quality control devices for testing the creasing values of packaging blanks. With devices such as the crease bend tester, not only a smooth packaging process can be ensured, but also the quality of the produced packaging.
Marbach was recently visited by its customer Å&R Carton Lund AB for an audit. Å&R Carton looked closely at Marbach from a number of viewpoints and certified Marbach with a very good performance.
With its marbanick|2 for paperboard tools, Marbach has brought a hand tool onto the market that convinces users with its flexibility and simplicity. Since its introduction in May 2018, Marbach has sold almost 200 of these hand-held devices.
Marbach expands its Die Supplies & Automation division. From 01 February 2019, André Angermeir joins the Marbach team as the new Sales Manager. With Angermeir, Marbach has been able to gain an industry insider with a wealth of experience in the world of cutting-dies.